0-1500V adjustable voltage, 0-6A current, and 3000W auto-ranging power in a compact 2U 19" rack chassis. Built-in function generator with sine/triangle/arbitrary/PV/fuel cell modes, touchscreen HMI, analog & digital remote control, master-slave parallel up to 192kW, and full protections (OVP/OCP/OPP/OT). Ideal for ultra-high-voltage battery stacks, EV drivetrain testing, solar string inverters, and industrial high-voltage ATE.

Cooling

Water Cooled (Optional)

Output Current

0-6A

Output Power

3000W

Output Voltage

0-1500V

Type

Characteristic Curve

U/I/P autoranging

External Control

Analogue 0-5V/0-10V, USB, LAN, Modbus TCP, Profibus, DeviceNet, RS232, CAN

Housing

19" rack

Human Interface

Touch panel & Menu

Special Feature

Function Generator

GET A QUOTE

Add to Quote List View Quote List

Description

30-Second Fit Check

Output: 0-1500V, 0-6A, 3000W with true autoranging (U/I/P).
AC input: 110-127V / 208-240V ±10% (single phase or two-phase), 45-65Hz. On 110V input, output derates to 1500W.
Efficiency: ≤95% at full load and full output voltage.
Regulation: Load regulation CV ≤0.05% FS, line regulation ≤0.01% FS.
Ripple: 150mV rms / 6500mV pp (CV mode, 300 kHz / 20 MHz BW).
Protections: Adjustable OVP, OCP, OPP, plus OT, PF.
Cooling: Variable speed fan (standard) or optional water cooled for silent operation in clean environments.

What It Is + Why It Matters

Ultra-high-voltage programmable DC power supply for EV battery module testing, solar string inverters, and high-power industrial R&D.
Autoranging output delivers full 3000W across wide voltage/current range – no manual range switching.
Built-in function generator with sine, triangle, rectangle, trapezoid, arbitrary (99 points), ramp, DIN 40839, plus PV and fuel cell simulation (EN 50530 compliant).
Master-Slave parallel operation – up to 64 units for 192kW total power; genuine current sharing via Share bus and digital MS bus.
High stability: temp coefficient CV ≤30ppm/°C after warm-up.

Note: Remote sensing compensates up to 5% of U_Nom. Always use DC terminal covers when hazardous voltages present.

Key Specs (EA-PSI 11500-06 2U)

Voltage range: 0-1500V (adjustable).
Current range: 0-6A (adjustable).
Power range: 3000W (autoranging).
Internal resistance simulation: 8Ω – 6000Ω.
Rise/Fall time (CV): ≤20ms (10-90%).
Display accuracy: Voltage ≤0.05% FS, Current ≤0.1% FS.
Insulation: AC input to DC output 3750Vrms; DC minus to PE ±1500V, DC plus to PE +2000V.
Output capacitance: 20μF.

Interfaces & Remote Control

Standard digital: USB (rear B port) + Ethernet (100M) supporting SCPI and ModBus RTU; USB host (front) for data logging and sequence loading.
Built-in analog interface (15-pin D-Sub): 0-5V / 0-10V selectable range for set/readback of U/I/P/R; includes remote on/off, alarm outputs (OT/OVP/OCP/OPP), and CV/CC status.
Optional plug-in modules (IF-AB series): Profibus, ProfiNet, CAN, CANopen, RS232, ModBus TCP, EtherCAT, DeviceNet – installable without opening the device.
Web server on LAN port for network configuration and manual SCPI commands.
Remote sense for voltage drop compensation (max 5% of U_Nom).

Best for / Not for

Best for: High-voltage battery stack testing (up to 1500V), solar string inverter MPPT testing, fuel cell simulation for heavy-duty vehicles, DC-DC converter validation for ultra-high voltage, capacitor bank charging, and traction motor controller testing.
Not for: Applications requiring output above 1500V or above 6A per single unit (use master-slave parallel to scale current); low-voltage high-current applications (consider other PSI 10000 models).

Selection Checklist + Integration

Confirm AC supply: 208-240V recommended for full 3000W; on 110-127V derated to 1500W.
DC cable cross-section: For 6A / 5m length, use at least 1.5mm² (AWG16) with insulation rated for 1500V DC.
Mounting: 19" rack, 2U height, allow >30cm rear clearance for airflow. For silent operation, consider optional water cooling.
For master-slave parallel: Connect Share bus (BNC) and MS bus (RJ45 CAT5); configure termination (BIAS/TERM) per manual.
For high-voltage safety: Always use included DC terminal covers and follow discharge procedure (capacitors may hold charge).
For PV simulation: Prepare IU table (4096 points) on USB or use internal EN50530 day trend; connect a solar inverter as load.
Firmware: KE/HMI 3.02+ recommended for extended PV functions and SEMI F47 support.