Industrial Power Product Collections

Programmable DC power supplies with precise voltage and current control, low ripple, and high efficiency for R D labs, automated testing, and industrial applications.

DIN-Rail Power Supply

Optimized for control cabinets and industrial DIN-rail mounting, with robust performance under harsh conditions.

AC/DC & DC/DC Bidirectional Power Modules

Supports both sourcing and sinking of power, suitable for EV, battery simulation, and regenerative testing.

EA-PSI 10000 4U Series programmable DC power supply delivering 30 kW output with models covering 0–60 V to 0–2000 V and currents up to 1000 A in a 4U 19-inch rack chassis. Equipped with a built-in function generator, galvanically isolated analog interface, USB, and Ethernet, it is perfectly suited for industrial testing, battery charging, photovoltaic simulation, and laboratory automation.

EA-BT 21500-30 3U

0-1500V output voltage, 0-30A current, and 15000W autoranging power in a compact 3U 19" rack chassis. Regenerative energy recovery up to 96%, 18-bit digital control, 1 ms command cycle, CV/CC/CP/CR modes, reverse polarity detection, auto pre-charge, and dynamic sense regulation. Built-in Gbit Ethernet, EtherCAT, CAN FD, ProfiNet. Ideal for high-voltage EV battery packs (up to 1500V), module and cell testing in R&D, production, and second-life applications.

EA-PS 9080-100 1U

3000W autoranging 1U 19″ rack programmable DC power supply with 0–80V, 0–100A output, active PFC, and up to 92% efficiency. Equipped with a graphic dot‑matrix display, internal resistance simulation, remote sensing, and a Share Bus for parallel operation. Remote control via galvanically isolated analog (0–5/10V), USB, and Ethernet (SCPI/ModBus). Ultra‑compact 1U height saves critical rack space in automated test and burn‑in systems.

EA-PU 10000 4U Series

Cost-optimized EA-PU 10000 4U series programmable DC power units with wide 60–2000V output, 40–1000A current, and 30kW autoranging power in a 4U 19‑inch rack enclosure. Featuring active PFC, up to 96.5% efficiency, an LED status panel, and built‑in analog/USB/Ethernet interfaces with optional CAN, Profibus, ProfiNet, and more, they are expertly designed as power units for master‑slave systems, enabling scalable, high‑density DC source solutions for industrial automation, test systems, and laboratory applications.

PSB 20060-170 Triple

0-60V per channel, 0-170A per channel, and 15000W total autoranging power in a compact 3U 19" rack chassis. Three fully independent, isolated bidirectional channels with regenerative energy recovery up to 94.5%. Built-in function generator, touchscreen HMI, master-slave parallel up to 120kW, USB, Gbit Ethernet, EtherCAT, and CAN FD. Ideal for multi-channel battery testing, motor/inverter/on-board charger validation, and automotive R&D.

EA-PS 10000 2U Series

High-density EA-PS 10000 2U series programmable DC power supplies with wide 60–1500V output, 6–120A current, and 1500–3000W auto‑ranging power in a 19‑inch 2U rack enclosure. Featuring active PFC, up to 95% efficiency, a 5″ TFT touch panel, remote sensing, Share bus for parallel connection, and built‑in analog/USB/Ethernet interfaces with optional CAN, CANopen, RS232, Profibus, ProfiNet, ModBus TCP, and EtherCAT, they are perfectly suited for automated test systems, industrial electronics, and high‑power laboratory experiments demanding minimal rack space.

EA-ELR 10000 2U Series

High-efficiency EA-ELR 10000 2U series programmable regenerative DC electronic loads with wide 80–1500V voltage, 6–120A current, and 1500–3000W power in a 2U 19‑inch rack enclosure. Featuring up to 95% energy recovery, a 5″ TFT touch panel, built-in arbitrary function generator, master‑slave parallel capability for up to 64 units, and galvanically isolated analog/USB/Ethernet interfaces with optional CAN, Profibus, ProfiNet, EtherCAT, and more, they are expertly suited for battery testing, solar panel MPPT simulation, automotive electronics, and high‑power industrial test systems demanding energy efficiency and precision.

EA-PS 9000 1U Series

High-density EA-PS 9000 1U series programmable DC power supplies with wide 80–750V output, 6–100A current, and 1500–3000W auto‑ranging power in a 19‑inch 1U rack enclosure. Featuring active PFC, up to 95% efficiency, a blue LCD control panel, remote sensing, Share bus for parallel connection, and built‑in analog/USB/Ethernet interfaces, they are perfectly suited for automated test systems, industrial electronics, and high‑power laboratory experiments demanding minimal rack space.

EA-PS3000 C Series

Compact EA-PS 3000 C series programmable DC power supplies with wide 40–200V output, 2–40A current, and 160–640W auto-ranging power in a space-saving benchtop enclosure with carrying handle. Featuring active PFC, a multi-language colour display, remote sensing, flexible protection suite, and optional galvanically isolated USB/Ethernet/Analog interfaces, they are perfectly suited for laboratory testing, industrial automation, and R&D environments demanding precision, efficiency, and easy integration.

EA-PSI 10360-15 2U

0-360V adjustable voltage, 0-15A current, and 1500W auto-ranging power in a compact 2U 19" rack chassis. Built-in function generator with sine/triangle/arbitrary/PV/fuel cell modes, touchscreen HMI, analog & digital remote control, master-slave parallel up to 192kW, and full protections (OVP/OCP/OPP/OT). Ideal for solar inverter MPPT testing, battery charging, automotive electronics, and automated test systems.

AIF240-B48S

240W AC/DC DIN-rail power supply with universal 85–264VAC or 120–370VDC input, 48VDC output, 5A rated current, high-efficiency performance, and 150% peak load capability for 3 seconds. Featuring built-in active PFC, LED power indicator, compact 124 × 54 × 110mm housing, free-air convection cooling, and full short-circuit, over-current, over-voltage, and over-temperature protection, it is ideal for industrial control, machine equipment, and DIN-rail automation systems.

AIF480-B24

480W AC/DC DIN-rail power supply with universal 85–264VAC or 120–370VDC input, delivering 24VDC output at 20A with up to 94.5% efficiency and active PFC above 0.99. Featuring an ultra-slim 48mm width, compact 131.5 × 48 × 125mm design, DC OK signal, low ripple and noise, 3000VAC I/O isolation, and protections for short circuit, over-current, over-voltage, over-temperature, and input under-voltage, it is ideal for industrial control systems and machine applications.

AIMF480-B24

480W AC/DC DIN-rail power supply with universal 85–277VAC or 120–390VDC input, delivering stable 24V output with high efficiency up to 95.5%, compact metal enclosure (~124 × 65 × 127mm), and wide operating temperature range from -40°C to +85°C. Featuring active PFC, low ripple & noise, comprehensive protections (short circuit, over-current, over-voltage, over-temperature), and high reliability, it is ideal for industrial automation, machine control, power systems, LED applications, and 5G communication equipment.

AIF240-B12S

240W AC/DC DIN-rail power supply with universal 85–264VAC or 120–370VDC input, 12VDC output, 16A rated current, up to 93% efficiency, and 150% peak load capability for 3 seconds. Featuring built-in active PFC, LED power indicator, compact 124 × 54 × 110mm housing, free-air convection cooling, and full short-circuit, over-current, over-voltage, and over-temperature protection, it is ideal for industrial control, machine equipment, and DIN-rail automation systems.

AIF240-B24S

240W AC/DC DIN-rail power supply with universal 85–264VAC or 120–370VDC input, 24VDC output, 10A rated current, up to 94% efficiency, and 150% peak load capability for 3 seconds. Featuring built-in active PFC, LED power indicator, compact 124 × 54 × 110mm housing, free-air convection cooling, and full short-circuit, over-current, over-voltage, and over-temperature protection, it is ideal for industrial control, machine equipment, and DIN-rail automation systems.

TPS030-GP24V

Reliable GP Series DIN rail power supply with adjustable 24–28VDC output, 1.25A current, and 30W power in a compact 91×53×60mm housing. Designed for universal 90–264VAC / 120–370VDC input, it fits building automation, alarm and safety systems, LED lighting, environmental control, industrial automation, and medical equipment.

TPS010-GP24V

Compact GP Series DIN rail power supply with adjustable 24–28VDC output, 0.42A current, and 10W power in a slim 91×23×60mm housing. With universal 90–264VAC / 120–370VDC input, it is well suited for building automation, alarm and safety systems, LED lighting, environmental control, industrial automation, and medical equipment.

TPS060-GP12V

High-performance GP Series DIN rail power supply with adjustable 12–15VDC output, 4.5A current, and 54W power in a 91×71×60mm enclosure. Featuring universal 90–264VAC / 120–370VDC input, it is suitable for building automation, alarm and safety systems, LED lighting, environmental control, industrial automation, and medical equipment.

TPS100-GP24V

Robust GP Series DIN rail power supply with adjustable 24–28VDC output, 4.2A current, and 100W power in a 91×90×60mm housing. Featuring universal 90–264VAC / 120–370VDC input, it is well suited for building automation, alarm and safety systems, LED lighting, environmental control, industrial automation, and medical equipment.

TPS010-GP12V

Compact GP Series DIN rail power supply with adjustable 12–15VDC output, 0.85A current, and 10W power in a slim 91×23×60mm housing. Featuring universal 90–264VAC / 120–370VDC input, it is ideal for building automation, alarm and safety systems, LED lighting, environmental control, industrial automation, and medical equipment.

TBM230-13K5TIF

Compact TBM series three-phase medium-voltage AC-DC bidirectional power module with 13.5kW rated output, 230VDC output, 58.7A rated current, 380/400/415VAC 3Ph+PE input, and 268 × 86 × 435mm dimensions. Featuring seamless rectifier/inverter switching, up to 93.5% AC-to-DC efficiency and 92.5% DC-to-AC efficiency, PF above 0.99, THDi below 5%, CAN communication, intelligent forced-air cooling, and parallel expansion up to 8 units, it is ideal for battery module test equipment, electrical bidirectional test equipment, and power aging equipment.

TBM750-53KUIF

High-power TBM series three-phase 750V AC-DC bidirectional power module with 53kW rated output, 480VAC 3Ph+PE input, 750VDC output, 70.7A rated current, and compact 435 × 86 × 600mm body size or 489 × 86 × 647.5mm with handle. Featuring seamless bidirectional switching, up to 96.0% AC-to-DC efficiency and 95.0% DC-to-AC efficiency, PF up to 0.99, THDi below 5%, intelligent forced-air cooling, automatic parallel expansion, and stable operation at 45°C without derating, it is ideal for battery PACK testing, bidirectional power testing, and energy-recyclable power aging applications.

TBM800-53KTIT

High-power TBM series three-phase 800V AC-DC bidirectional power module with 53kW rated output, 380/400/415VAC 3Ph+PE input, 800VDC output, 66.3A rated current, and compact 435 × 86 × 600mm dimensions or 489 × 86 × 647.5mm with handle. Featuring seamless bidirectional switching, up to 96.0% AC-to-DC efficiency and 95.0% DC-to-AC efficiency, PF above 0.99, THDi below 3%, switching time under 2ms, intelligent forced-air cooling, and stable operation at 45°C without derating, it is ideal for battery PACK aging and testing, bidirectional testing, and regenerative power supply aging applications.

TBM750-53KTIF-S

High-power TBM series three-phase 750V AC-DC bidirectional power module with 53kW rated output, 380/400/415VAC 3Ph+PE input, 750VDC output, 70.7A rated current, and compact 435 × 86 × 600mm dimensions or 489 × 86 × 647.5mm with handle. Featuring seamless bidirectional switching, up to 96.0% AC-to-DC efficiency and 95.0% DC-to-AC efficiency, PF up to 0.99, THDi below 5%, intelligent forced-air cooling, and stable operation at 45°C without derating, it is ideal for cell series formation, battery PACK aging, and regenerative power supply aging applications.

TBM15-7200THI(R)T

Compact TBM series three-phase low-voltage AC-DC bidirectional power module with 7.2kW rated output capacity, 380/400/415VAC 3Ph+PE input, 15VDC output, 480A rated current, and 176 × 86 × 285mm high-power-density design. Featuring high-frequency isolation, seamless bidirectional energy conversion, PF 0.99, THDi below 5%, 91.5% AC-to-DC peak efficiency, CAN communication, intelligent forced-air cooling, and parallel expansion up to 4 units, it is ideal for cell formation and test equipment, bidirectional power testing, and energy-recyclable power aging applications.

TBM15-13KTHI(R)T

Compact TBM series three-phase low-voltage AC-DC bidirectional power module with 15VDC output, 866.7A rated current, 13kW power, 380/400/415VAC 3Ph+PE input, and a compact 218 × 86 × 300mm design. Featuring high-frequency isolation, up to 93.5% AC-to-DC efficiency and 92% DC-to-AC efficiency, PF above 0.99, THDi below 5%, CAN communication, intelligent forced-air cooling, and parallel expansion up to 4 units, it is ideal for cell formation and test equipment, bidirectional power testing, and energy-recyclable power aging applications.

TBM14-2250SIR

Compact TBM series single-phase low-voltage AC-DC bidirectional power module with 2.25kW rated output capacity, 220/230/240VAC L+N+PE input, 14VDC output, 161A rated current, and 141 × 44 × 285mm high-power-density design. Featuring high-frequency isolation, fast bidirectional switching within 10ms, PF 0.99, THDi below 5%, 93.5% AC-to-DC peak efficiency, intelligent forced-air cooling, automatic parallel operation up to 8 units, and complete fault protection, it is ideal for cell formation and testing, bidirectional power testing, and energy-recyclable power aging applications.

TDM570T15-12KIRF

High-density TDM570T15 Series bidirectional isolated DC-DC power module with 12kW rated output, 570VDC high-voltage side, 14–16VDC / 800A low-voltage side, and a compact 300 × 220 × 86mm enclosure. Featuring up to 94.5% peak efficiency, high-frequency isolation, CAN communication, intelligent forced-air cooling, and stable operation from -10°C to 30°C at full load, it is ideal for cell formation and test equipment, bidirectional testing systems, energy storage applications, and energy-recyclable power aging equipment.

TBM15-10KTHI(R)F

Compact TBM series three-phase low-voltage AC-DC bidirectional power module with 15VDC output, 666.7A rated current, 10kW power, 380/400/415VAC 3Ph+PE input, and compact 218 × 86 × 300mm dimensions. Featuring high-frequency isolation, up to 92% bidirectional efficiency, PF above 0.99, THDi below 5%, CAN communication, intelligent forced-air cooling, and parallel expansion up to 4 units, it is ideal for cell formation and testing, bidirectional power testing, and energy-recyclable power aging applications.

TBM750-53KTIT

High-power TBM series three-phase 750V AC-DC bidirectional power module with 53kW rated output, 380/400/415VAC 3Ph+PE input, 750VDC output, 70.7A rated current, and compact 435 × 86 × 600mm dimensions or 489 × 86 × 647.5mm with handle. Featuring seamless bidirectional switching, up to 96% AC-to-DC efficiency and 95% DC-to-AC efficiency, PF up to 0.99, THDi below 5%, intelligent forced-air cooling, and stable operation at 45°C without derating, it is ideal for battery PACK testing, bidirectional power testing, and energy-recyclable power aging applications.

PFS3000T72

High-density PFS3000 Series 3000W AC/DC power supply with 72VDC output, 41.7A current, and 65–79V adjustable range in a compact 108.8 × 278.1 × 41mm enclosure. Featuring 90–264VAC universal input, remote sense, DC_OK signal, and 2xMOPP medical isolation, it is suitable for medical devices, industrial equipment, cooling systems, and linear motor applications.

PFS3000T100

High-voltage PFS3000 Series 3000W AC/DC power supply with 100VDC output, 30A current, and 90–110V adjustable range in a compact 108.8 × 278.1 × 41mm design. Built with 90–264VAC universal input, intelligent fan speed control, active current sharing, and 2xMOPP isolation, it is ideal for industrial automation, medical equipment, robotics, and advanced power system integration.

PFS3000T150

High-voltage PFS3000 Series 3000W AC/DC power supply with 150VDC output, 20A current, and 132–150V adjustable range in a compact 108.8 × 278.1 × 41mm enclosure. Featuring 90–264VAC universal input, 2xMOPP isolation, intelligent cooling control, and active current sharing, it is well suited for industrial automation, medical equipment, robotics, and demanding high-power DC applications.

PFS3000T120

High-voltage PFS3000 Series 3000W AC/DC power supply with 120VDC output, 25A current, and 110–132V adjustable range in a compact 108.8 × 278.1 × 41mm housing. Designed with 90–264VAC universal input, remote on/off control, active current sharing, and IEC 62368-1 / IEC 60601-1 compliance, it is ideal for industrial systems, medical applications, robotics, and specialized automation equipment.

PFS1500T72

High-voltage PFS1500 Series 1500W AC/DC power supply with 72VDC output, 20.9A current, 65–79V adjustable range, and up to 94% efficiency in a compact 127 × 203 × 40mm design. Featuring 90–264VAC no-derating universal input, DC_OK signal, remote sense, and 2xMOPP medical isolation, it is suitable for industrial automation, medical equipment, cooling systems, and linear motor applications.

PFS3000T60

High-power PFS3000 Series 3000W AC/DC power supply with 60VDC output, 50A current, and 54–66V adjustable range in a compact 108.8 × 278.1 × 41mm enclosure. With 90–264VAC universal input, IEC 62368-1 and IEC 60601-1 compliance, remote control, and PMBus or CANBus options, it is ideal for industrial equipment, medical systems, linear motors, and stage lighting applications.

PFS1500T42

High-power PFS1500 Series 1500W AC/DC power supply with 42VDC output, 35.8A current, and 37.8–46.4V adjustable range in a compact 127 × 203 × 40mm housing. Built with 90–264VAC no-derating universal input, 2xMOPP medical isolation, remote sense, and PMBus communication, it is ideal for industrial equipment, medical devices, collaborative robots, cooling systems, and stage lighting systems.

PFS3000T24

High-density PFS3000 Series 3000W AC/DC power supply with 24VDC output, 125A current, and 24–28V adjustable range in a compact 108.8 × 278.1 × 41mm enclosure. Featuring 90–264VAC universal input, 2xMOPP medical isolation, remote control, and active current sharing, it is ideal for industrial equipment, medical systems, AGV charging modules, collaborative robots, and stage lighting.

PFS3000T48

High-efficiency PFS3000 Series 3000W AC/DC power supply with 48VDC output, 62.5A current, and 42–53.5V adjustable range in a compact 108.8 × 278.1 × 41mm housing. Delivering up to 95% efficiency with 90–264VAC universal input, 2xMOPP isolation, and intelligent fan control, it is ideal for medical devices, industrial equipment, cooling systems, linear motors, and collaborative robots.

PFS3000T36

High-density PFS3000 Series 3000W AC/DC power supply with 36VDC output, 83.4A current, and 33–40V adjustable range in a compact 108.8 × 278.1 × 41mm enclosure. Designed with 90–264VAC universal input, 2xMOPP medical isolation, DC_OK signal, and remote on/off control, it fits industrial equipment, linear motor systems, medical electronics, and AGV charging applications.

eTM-305P

Programmable 4-digit P Series DC bench power supply with 0–30V adjustable output, 0–5A current, and 150W power in a compact 280 × 130 × 165mm desktop enclosure. Featuring hardware list sequence output, 6 groups of quick parameter storage, rear communication for setting and programming, and multi-protection functions, it is ideal for circuit board testing, mobile phone testing, electronics labs, and production test applications.

eTM-1502P

Programmable 4-digit P Series DC bench power supply with 0–150V adjustable output, 0–2A current, and 300W power in a compact 280 × 130 × 165mm desktop enclosure. Featuring hardware list sequence output, 6 groups of quick parameter storage, rear communication for setting and programming, and comprehensive protection functions, it is suitable for circuit board testing, mobile phone testing, electronics laboratories, and high-voltage programmable power applications.

eTM-1003F

4-digit F Series DC bench power supply with 0–100V adjustable output, 0–3A current, and 300W power in a compact 280 × 130 × 165mm enclosure. Featuring preset voltage and current, power display, ON/OFF output switching, and rear communication for output control and reading, it is ideal for circuit board testing, mobile phone testing, electronics development, and precision high-voltage bench applications.

eTM-305F

4-digit F Series DC bench power supply with 0–30V adjustable output, 0–5A current, and 150W power in a compact 280 × 130 × 165mm desktop enclosure. Featuring preset voltage and current, power display, ON/OFF output control, and rear communication for output control and reading, it is ideal for circuit board testing, mobile phone testing, electronics servicing, and laboratory bench applications.

K19H-UP1000S24

Compact K19H-UP1000S Series switching mode power supply with 24VDC output, 42A rated current, and 1008W power in a slim 214 × 82 × 48mm housing. With 90–264VAC universal input, up to 93% efficiency, active PFC, and multiple protection functions, it is well suited for industrial control systems, automation equipment, and high-density power integration applications.

eTM-1003P

Programmable 4-digit P Series DC bench power supply with 0–100V adjustable output, 0–3A current, and 300W power in a compact 280 × 130 × 165mm enclosure. Featuring hardware list sequence output, 6 groups of quick parameter storage, rear communication for setting and programming, and multi-protection design, it is ideal for circuit board testing, mobile phone testing, electronics R&D, and precision high-voltage bench applications.

eTM-3010

3-digit standard series DC bench power supply with 0–30V adjustable output, 0–10A current, and 300W power in a compact 280 × 130 × 165mm desktop enclosure. Designed with preset voltage and current, power display, ON/OFF output switching, and rear communication for read and output control, it is ideal for circuit board testing, mobile phone testing, electronics repair, and general laboratory use.

eTM-605P

Programmable 4-digit P Series DC bench power supply with 0–60V adjustable output, 0–5A current, and 300W power in a compact 280 × 130 × 165mm desktop housing. With hardware list sequence output, 6 groups of quick parameter storage, rear communication for setting and programming, and advanced protection functions, it is well suited for circuit board testing, mobile phone testing, automated electronics verification, and laboratory use.

eTM-1520P

Programmable 4-digit P Series DC bench power supply with 0–15V adjustable output, 0–20A high current, and 300W power in a compact 280 × 130 × 165mm desktop design. Designed with hardware list sequence output, 6 groups of quick parameter storage, rear communication for setting and programming, and five-level protection, it is ideal for circuit board testing, mobile phone servicing, high-current electronics testing, and automated bench systems.

K18N-UP200S5

Compact K18N-UP200 Series 200W switching power supply with 5VDC output, 40A rated current, 0–40A output range, and a slim 127 × 82 × 45mm enclosure. Featuring 90–264VAC universal AC input, built-in active PFC, efficiency above 88%, and short circuit, overload, over-voltage, and over-temperature protection, it is ideal for compact industrial equipment, control systems, and embedded power applications.

ONV-H3064PFD

Full Gigabit PoE fiber switch with 4 × 10/100/1000Base-T PoE ports, 2 × Gigabit RJ45 uplink ports, 1 × 1000Base-X SFP uplink port, up to 30W PoE output per port, and 65W total PoE budget in a compact 200 × 130 × 40mm metal enclosure. Featuring 14Gbps switching capacity, 10.4Mpps forwarding rate, IEEE 802.3af/at support, 250m long-distance VLAN mode, PoE watchdog, built-in AC100–240V power supply, and 4KV lightning protection, it is ideal for IP cameras, wireless APs, VoIP phones, video intercom, security monitoring, hotels, campuses, factory sites, and small to medium-sized enterprise network deployments.

2632

High-performance 1.25Gbps SFP optical transceiver operating at 1310nm wavelength, supporting dual data rates up to 1.25Gbps and transmission distances up to 20km over single-mode fiber. Features 3.3V supply voltage, low power consumption below 0.8W, duplex LC interface, digital diagnostic monitoring (DDM), and compact hot-pluggable design (~55.4 × 13.7 × 8.5mm), ideal for Gigabit Ethernet, fiber channel, switch-to-switch links, and telecom network applications.

7832-27&7832-33

High-speed 10Gb/s SFP+ bi-directional optical transceiver supporting 9.95–10.3Gb/s data rate, single-mode fiber transmission up to 20km, and operating wavelengths of 1270/1330nm. Features low power consumption (

ONV-H3016

16-port unmanaged Gigabit Ethernet switch with 16 × 10/100/1000Base-T RJ45 adaptive ports, 32Gbps switching capacity, 23.81Mpps forwarding rate, and a compact 270 × 181 × 44.5mm metal housing. Featuring non-blocking wire-speed forwarding, built-in AC100–240V power supply, low power consumption under 15W, fanless stable operation, desktop/wall/1U rack installation, and 4KV lightning protection, it is ideal for hotels, banks, campuses, factory dormitories, small and medium-sized enterprises, and surveillance networking applications.

ONV-H3108PS

10-port unmanaged Gigabit PoE switch with 8 × 10/100/1000Base-T PoE ports, 2 × Gigabit RJ45 uplink ports, up to 30W PoE output per port, and 100W total PoE budget in a compact 195 × 130 × 40mm metal enclosure. Featuring IEEE 802.3af/at support, 20Gbps switching capacity, 14.88Mpps forwarding rate, built-in AC100–240V power supply, fanless low-power design, and 4KV lightning protection, it is ideal for IP cameras, wireless APs, VoIP phones, video intercom, security monitoring, teleconferencing, and small to medium-sized enterprise network deployments.

7832

High-speed 10Gb/s SFP+ 1310nm optical transceiver supporting 9.95–10.5Gb/s data rate, single-mode fiber transmission up to 20km, and 3.3V supply voltage. Features low power consumption below 1W, hot-pluggable SFP+ footprint, duplex LC connector, digital diagnostic monitoring (DDM), 0~70°C operating temperature, and compact 56.7 × 13.7 × 8.5mm module design, ideal for 10G Ethernet links, 10G fiber channels, telecom networks, and high-speed optical data communication.

ONV-H3054PFD

Compact 6-port full Gigabit PoE fiber switch with 4 × 10/100/1000Base-T PoE RJ45 ports, 1 × 10/100/1000Base-T uplink RJ45 port, 1 × 1000Base-X uplink SFP port, 12Gbps switching capacity, 8.93Mpps forwarding rate, up to 30W PoE output per port, and 65W total power budget in a 200 × 130 × 40mm metal enclosure. Featuring 250m long-distance VLAN isolation mode, PoE watchdog, built-in AC100–240V power supply, and plug-and-play operation, it is ideal for IP cameras, wireless APs, VoIP phones, video intercom, hotels, campuses, factory sites, and small to medium-sized enterprise networks.

ONV-H3108PF

10-port Gigabit PoE switch with 8 × 10/100/1000M PoE ports, 2 × 1000M SFP uplink ports, IEEE 802.3af/at support, up to 30W per port, and 120W total PoE budget in a compact 195 × 130 × 40mm metal housing. Featuring 20Gbps switching capacity, 14.88Mpps forwarding rate, plug-and-play operation, built-in AC100–240V power supply, and desktop or wall mounting, it is ideal for IP cameras, wireless APs, VoIP phones, video intercom, security monitoring, hotels, campuses, factory sites, and small to medium-sized enterprise networks.

ONV-H3024

24-port unmanaged Gigabit Ethernet switch with 24 × 10/100/1000M RJ45 adaptive ports, 48Gbps switching capacity, 35.71Mpps forwarding rate, and a compact 330 × 204 × 44mm metal housing. Featuring store-and-forward transmission, non-blocking wire-speed forwarding, built-in AC100–240V power supply, fanless low-power design, and 4KV lightning protection, it is ideal for hotels, banks, campuses, factory dormitories, small and medium-sized enterprises, surveillance networking, and general Ethernet access applications.

ONV-H3108PFD

11-port full Gigabit PoE fiber switch with 8 × 10/100/1000Base-T PoE RJ45 ports, 2 × Gigabit uplink RJ45 ports, 1 × 1000Base-X SFP uplink port, 30W max PoE output per port, and 120W total PoE budget in a compact 200 × 130 × 40mm metal enclosure. Featuring 22Gbps switching capacity, 16.37Mpps forwarding rate, IEEE 802.3af/at support, 250m long-distance VLAN mode, PoE watchdog, built-in AC100–240V power supply, and 4KV lightning protection, it is ideal for IP cameras, wireless APs, VoIP phones, video intercom, security monitoring, hotel networks, campus deployment, factory quarters, and small to medium-sized enterprise applications.

YB-T series

Compact single-phase EMI filter designed for 115/250VAC and DC applications up to 400Hz, supporting 1A–16A rated current and multiple installation types (T1–T6 cases) with panel cutout mounting and dimensions up to approximately 93 × 50.5 × 50mm. Featuring excellent attenuation for both common mode and differential mode interference, 6.3×0.8mm faston terminals or wire outputs, non-metallic safety housing, and flexible installation options, it is ideal for home appliances, small power supplies, electronic equipment, and noise-sensitive electrical systems.

YB-D Series

Single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting 1A–30A rated current and D1–D6 case options with screw, wire, or terminal block output modes. Featuring enhanced filtering design, excellent high/low frequency noise attenuation, symmetric and asymmetric interference suppression, and compact dimensions for space-limited equipment, it is ideal for portable electrical and electronic equipment, robots, elevator systems, new energy equipment, small and medium-sized machines, and automation or datacom equipment.

YB-B Series

Compact IEC socket single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting rated currents up to 10A with multiple B1–B16 case options, quick-connect installation, single or dual fuse configurations, and 2-pole rocker switch options. Featuring ultra-small size, fast snap-in design, switch color options, and wire or terminal output modes, it is ideal for portable electrical and electronic equipment, test and measurement equipment, household equipment, small and medium-sized machines, single-phase power supplies, switch-mode power supplies, audio equipment, vending equipment, and medical equipment.

YX-G series (Terminal Bolt)

High-performance three-phase EMI filter with terminal bolt connection, supporting 3-phase power systems, wide current range from 6A to 200A, and multiple compact case sizes (G2–G6) with dimensions up to approximately 310 × 170 × 107mm. Designed for effective suppression of electromagnetic interference and voltage disturbances, featuring easy installation, secure wiring terminals, and customizable configurations, it is ideal for power supplies, UPS systems, industrial automation equipment, motor drives, SMPS, and precision control applications.

YB-C Series

Compact IEC socket single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting 1A–10A rated current with C1–C12 case options, optional single or double fuse switch configurations, and quick snap-in installation. Featuring compact shielding with optimal shielding performance, 2-pole rocker switch, single or dual fuse holder, ultra-small size, and screw or wire output modes, it is ideal for portable electrical and electronic equipment, test and measurement equipment, small and medium-sized machines, medical equipment, single-phase power supplies, and switch-mode power supplies.

YX-G series

Three-phase EMI filter for 440VAC worldwide power systems, supporting rated current from 1A to 1200A and multiple compact case sizes from G1 to G9. Featuring high attenuation performance up to 300MHz, selectable electrical schematics, secure screw or copper bar output options, and dimensions up to approximately 350 × 255 × 230mm, it is ideal for power supplies, UPS/SMPS, three-phase motor drives, industrial automation equipment, photovoltaic systems, and manipulator equipment.

YB-E Series

Compact single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting 1A–20A rated current with E1–E4 case options and screw or wire output modes. Featuring general-purpose filtering performance, compact structure, small size, easy installation, and dimensions from approximately 44 × 22 × 29mm to 70.5 × 36 × 50mm, it is ideal for portable electrical and electronic equipment, test and measurement equipment, lamps, advertising equipment, vending equipment, and financial equipment.

YB-A Series

Compact IEC socket single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting 1A–20A rated current with A1–A13 case options, quick-connect output, screw or wire connection, and standard or low-leakage electrical schemes. Featuring excellent performance with compact structure, snap-in side installation, front/rear screw fixing, and multiple compact sizes, it is ideal for small household equipment, power supply equipment, test and measurement equipment, and small to medium-sized machines.

YB-D+DIN Series

Compact single-phase EMI filter for 115/250V and DC systems up to 400Hz, supporting 1A–30A rated current with D5T and D5N case options and terminal block, terminal bolt, or screw output modes. Featuring lightweight plastic housing, anti-drop bolt design, safer covered terminal block, optional DIN-rail mounting, and compact dimensions down to 73 × 38 × 56mm, it is ideal for electronic and electrical equipment, building automation, medical equipment, and automatic data processing systems.

YB-F Series

Single-phase EMI filter for 115/250VAC and DC systems up to 400Hz, supporting 1A–200A rated current and multiple F1–F6 case options with screw, wire, or terminal block outputs. Featuring enhanced filtering design, excellent differential-mode and common-mode attenuation, selectable electrical schematics, and compact dimensions up to approximately 260 × 220 × 100mm, it is ideal for power supplies, building automation, industrial automation equipment, elevator equipment, manipulator equipment, and new energy equipment.

CP1000T28

Compact CP1000 Series 1000W AC/DC battery charger with 28V battery charging platform, up to 35.7A charging current, built-in LFP and NCM lithium-ion charging curves, and a 127.3 × 215.6 × 43mm housing. With 90–264VAC no-derating universal input, battery reverse connection protection, CAN communication, and 2xMOPP isolation, it is well suited for industrial equipment, medical battery applications, AGV charging modules, cleaning robot charging modules, and linear motor systems.

CP1000T24

Compact CP1000 Series 1000W AC/DC battery charger with 24V battery charging platform, up to 41.7A charging current, built-in LFP and NCM lithium-ion charging curves, and a 127.3 × 215.6 × 43mm enclosure. Featuring 90–264VAC no-derating universal input, 2xMOPP isolation, CAN communication, and remote control functions, it is ideal for industrial equipment, medical battery systems, AGV charging modules, cleaning robot charging modules, and linear motor applications.

CP1500T28

Compact CP1500 Series 1500W AC/DC battery charger with 28V battery charging platform, up to 53.6A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm design. With 90–264VAC no-derating universal input, battery reverse connection protection, CAN communication, and 2xMOPP isolation, it is well suited for industrial equipment, medical devices, AGV charging modules, cleaning robot chargers, and linear motor systems.

CP1500T72

High-voltage CP1500 Series 1500W AC/DC battery charger with 72V battery charging platform, up to 20.8A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm enclosure. Featuring 90–264VAC no-derating universal input, automatic battery connection detection, remote voltage sensing, 12V/1A auxiliary output, and CAN communication, it is ideal for industrial equipment, medical systems, AGV charging modules, and advanced linear motor applications.

CP1500T100

High-voltage CP1500 Series 1500W AC/DC battery charger with 100V battery charging platform, up to 10A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm design. Built with 90–264VAC no-derating universal input, battery reverse connection protection, remote control functions, CAN communication, and 2xMOPP isolation, it is ideal for industrial equipment, medical battery systems, AGV charging applications, and high-voltage linear motor solutions.

CP1500T36

Reliable CP1500 Series 1500W AC/DC battery charger with 36V battery charging platform, up to 41.2A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm housing. Designed with 90–264VAC no-derating universal input, automatic battery detection, remote voltage compensation, and CAN communication, it is ideal for industrial equipment, medical battery applications, AGV systems, linear motors, and collaborative robots.

CP1000T48

High-efficiency CP1000 Series 1000W AC/DC battery charger with 48V battery charging platform, up to 20.8A charging current, built-in LFP and NCM lithium-ion charging curves, and up to 93% efficiency in a compact 127.3 × 215.6 × 43mm enclosure. Featuring 90–264VAC no-derating universal input, 2xMOPP isolation, intelligent fan speed control, and remote control functions, it is ideal for industrial equipment, medical battery systems, AGV charging modules, cleaning robot charging modules, and linear motor applications.

CP1500T60

High-power CP1500 Series 1500W AC/DC battery charger with 60V battery charging platform, up to 25A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm package. With 90–264VAC no-derating universal input, full-charge auto stop, remote on/off control, CAN communication, and 2xMOPP isolation, it is suitable for industrial equipment, medical battery charging, AGV modules, collaborative robots, and linear motor systems.

CP1000T100

High-voltage CP1000 Series 1000W AC/DC battery charger with 100V battery charging platform, up to 10A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm design. Built with 90–264VAC no-derating universal input, battery reverse connection protection, remote control functions, CAN communication, and 2xMOPP isolation, it is ideal for industrial equipment, medical battery systems, AGV charging applications, cleaning robot chargers, and high-voltage linear motor solutions.

CP1000T72

High-voltage CP1000 Series 1000W AC/DC battery charger with 72V battery charging platform, up to 13.9A charging current, built-in LFP and NCM lithium-ion charging curves, and a compact 127.3 × 215.6 × 43mm enclosure. Featuring 90–264VAC no-derating universal input, automatic battery connection detection, remote voltage sensing, 12V/1A auxiliary output, and CAN communication, it is ideal for industrial equipment, medical battery systems, AGV charging modules, cleaning robot charging modules, and advanced linear motor applications.

Accessories for Stability & Integration

Power + Data in One Connection
Clean Power for Every System